EOA3630 Quick Start Guide
Wireless Multi-Function AP
Quick Start Guide v.1.0
Refer to User’s Manual for complete instructions 1
The outdoor wireless device EOA3630 is a powerful, enhanced, enterprise scale product with 7
multi-functions. External N-type connector provides antenna extend. It features output power levels
setting, Narrow bandwidth selection, Traffic Shaping and Real-time RSSI indicator.
EOA3630 comes with wall mount kit and supports PoE function for quick outdoor installation. To
ensure wireless security, it provides full coverage of security encryption mechanisms support including
WEP, WPA/WPA2 and IEEE 802.1x.
Beside upgradable N-type interface which make it a scalable solution for all possible project
requirements. Stable and high reliability design let users don’t worry about the operation in harsh
environment.
---------------------------------------------------------------------------------------------------------------------------------------
IP Address Configuration
The default IP address of the device is
192.168.1.1. In order to log into this device, you
must first configure the TCP/IP settings of your
PC/Notebook.
1. In the control panel, double click Network
Connections and then double click on the
connection of your Network Interface Card
(NIC). You will then see the following
screen.
2. Select Internet Protocol (TCP/IP) and then
click on the Properties button. This will
allow you to configure the TCP/IP settings
of your PC/Notebook.
3. Select Use the following IP Address radio
button and then enter the IP address
(192.168.1.21) and subnet mask
(255.255.255.0). Ensure that the IP address
and subnet mask are on the same subnet as
the device.
4. Click on the OK button to close this
window, and once again to close LAN
properties window.
Logging In
1. To configure the device through the
web-browser, enter the IP address of the
Bridge (default: 192.168.1.1) into the
address bar of the web-browser and
press Enter.
2. After connecting to the IP address, the
web-browser will display the login page.
Specify admin as the default User Name
and Password, and then click on the Login
button.
Administration
1. Click on the Administration link under the
Management section. This option allows
you to modify to new user name and
password for the device. For security it is
highly recommended for security reasons.
2. Name: Specify a user name into the first
field.
3. Password: Specify a password into this field
and then re-type the password into the
Confirm Password field. Then click on the
Apply button.
4. Click on the Apply button to save the
changes.
System Properties
1. Click on the System Properties link on the
System section. This feature allows you to
configure the device as an Access Point or
Repeater.
2. Device Name: Specify a name for the
device – this is not the SSID.
(2 Seiten)
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern