EnGenius EAP1750H Bedienungsanleitung PDF herunterladen (Seite 43)

Using WDS (Wireless Distribution System) will allow

a network administrator or installer to connect to

Access Points wirelessly. Doing so will extend the wired

infrastructure to locations where cabling is not possible or

inefcienttoimplement.

Note: Compatibility between different brands and

models of Access Points is not guaranteed. It is

recommended that the WDS network be created using

thesamemodelsformaximumcompatibility.

Also Note: All Access Points in the WDS network must

use the same Channel and Security settings.

To create a WDS network, please enter the MAC addresses

of the Access Points that you want included in the WDS

network.Therecanbeamaximumoffour(4)AccessPoints.

Note: Only applicable in WDS AP and WDS Bridge modes.

2.4 GHz/5 GHz WDS Link Settings

Security: Select None or AES from the drop-down list.

AES Passphrase: Enter the Key Values you wish to use.

Other Access Points must use the same Key to establish a

WDS link.

MAC Address: Enter the Access Point’s MAC address to

whichyouwanttoextendthewirelessarea.

Mode:SelectDisable or Enable from the drop-down list.

Save: Click Savetoconrmthechanges.

WDS Link Settings

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

Keine Kommentare

EnGenius EAP1750H Bedienungsanleitung Seite 43