EnGenius ENH220EXT Bedienungsanleitung PDF herunterladen (Seite 16)

To attach the ENH220EXT to a wall using wall

mounting kit.

1. Mark the four locations of the mounting holes on the

atmountingsurface.

2. Drilla37mmdeep8mmholeinthemarkingsand

hammer the bolts into the openings.

3. Placethelockandatwashersonthefourhexcapscrews

and drive the screws to attach the bracket to the back of

the Access Point.

4. Tighten the at washers to secure the bracket to the

mounting surface.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 66 67

Keine Kommentare

EnGenius ENH220EXT Bedienungsanleitung Seite 16