EnGenius EAP300 Bedienungsanleitung PDF herunterladen (Seite 33)

RTS Threshold

When the packet size is smaller than the RTS Threshold, the packet will be sent without an

RTS/CTS handshake, which may result in incorrect transmission.

Beacon Interval

The time interval that the device broadcasts a beacon. This beacon is used to synchronize all

wireless clients on the network.

DTIM Period

A Delivery Traffic Indication Message (DTIM) informs all wireless clients that the access point

will be transmitting Multi-casted data.

N Data Rate

You can limit the transfer rates between the device and wireless clients. Each Modulation Coding

Scheme (MCS) refers to a specific transfer speed.

Channel Bandwidth

Set whether each channel uses 20Mhz or 40Mhz transmission frequency. To achieve 11n speeds,

40Mhz channels must be used.

Preamble Type

A preamble is a message that helps access points synchronize with the client.

Long Preamble is standard based so increases compatibility.

Short Preamble is non-standard, resulting in decreased compatibility, but increased performance.

Tx Power

Set the power output of the wireless signal.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 63 64

Keine Kommentare

EnGenius EAP300 Bedienungsanleitung Seite 33