EnGenius ESR-1221 EXT Bedienungsanleitung

1 11b/g Wireless SOHO Router User’s ManualVersion: 1.2

10 2. Select Internet Protocol (TCP/IP) and then click on the Properties button. This will allow you to configure the TCP/IP settings of your PC/Note

11  After logging in you will graphical user interface (GUI) of the device. The navigation drop-down menu on left is divided into four main sections:

12 Status  Click on the Status link under the Management menu. The device status page is also displayed once you have logged in

13 Statistics  Click on the Statistics link on the navigation drop-down menu. This page displays the transmitted and received packet st

14 Time Zone Setting  Click on the Time Zone Setting link in the navigation menu. This feature allows you to configure, update, and maintain the

15 Denial of Service (DoS)  Click on the Denial of Service link in the navigation menu. This is a security feature that blocks intrusions from the

16 Log  Click on the Log link on the navigation drop-down menu. Logs display a list of events that are triggered on the Ethernet and Wireless

17 Upgrade Firmware  Click on the Upgrade Firmware link on the navigation drop-down menu. This page allows you to upgrade the firmware of the dev

18 Restore the Configuration from a File  Click on the Save / Reload Settings link on the navigation drop-down menu. This option allows you to

19 Administrator Settings  Click on the Password link on the navigation drop-down menu. This page allows you to configure the password to access t

2 Table of Contents 1 INTRODUCTION...

20 LAN Settings – Static IP  Click on the LAN Interface link on the navigation drop-down menu. This feature allows you to configure

21 LAN Settings – DHCP Client  Click on the LAN link on the navigation drop-down menu. This feature allows you to configure the LAN interface

22 LAN Settings – DHCP Server  Click on the LAN link on the navigation drop-down menu. This feature allows you to configure the LAN interface

23 WAN Settings – Static IP  Click on the WAN link on the navigation drop-down menu. This feature allows you to configure the WAN interface using

24  Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of PPTP packets on a VPN connectio

25  Enable uPNP: Place a check in this box to enable UPnP. It is recommended to enable this feature as it’s used by several application

26  Connection Type: Select Continuous (always online), Connect on Demand(connect to the ISP only when you click on a website), or Manual (co

27  WAN Access Type: Select PPTP from the drop-down list. This type of connection is used when your ISP has provided you a dedicated IP address.  I

28 Wireless  Click on the TCP/IP Settings link on the navigation drop-down menu. You will then see five options. Basic Settings, Advanced S

29  Show Active Clients: Click on this button to view a list of clients that are associated with this device.  Click on the Apply Changesto save t

3 3.5.6 DMZ ...44APP

30  Beacon Interval: Beacons are packets sent by a wireless Access Point to synchronize wireless devices. Specify a Beacon Period value be

31 Wireless Security  To protect your privacy this mode supports several types of wireless security: WEP WPA, WPA2, and WPA-Mixed. WEP is t

32  Encryption: Select WEP from the drop-down list in order to enable WEP security and then click on the Set WEP key button. .  Key Le

33 Wireless Security – WPA / WPA2-Mixed  Select WPA or WPA2-Mixed from the drop-down list if your wireless network uses WPA encryption. WPA (Wi-

34  Click on the Apply Changes to save the changes. Wireless Access Control  Click on the Access Control link on the navigation drop-d

35 WDS (Wireless Distribution System) Click on the WDS link on the navigation drop-down menu. The Wireless Distribution System feature configures

36 WDS Security  Click on the Set Security button to configure one of the security options for the WDS. Options available are WEP, WPA and

37  Encryption: Select a 64-bit or 128-bit WEP encryption from the drop-down list.  Key Format: Select a key format such as HEX or ASCII from the dr

38  Encryption: Select a WPA or WPA2 encryption from the drop-down list. The encryption algorithm used to secure the data communica

39 Firewall  Click on the Firewall link on the navigation drop-down menu. You will then see six options. Port filtering, IP filtering,

4 Revision HistoryVersion Date Notes 1.0 Jul 10, 2008 Initial Version 1.1 Aug 6, 2008 1.2 Aug 11, 2008

40  You may place a check in the box on under the Select column and then click on Delete Selected to remove the selected entry. You

41 MAC Filtering Select MAC Filtering from the drop-down list. This feature is used to restrict certain MAC address from accessing the Internet. Th

42 Port Forwarding Select Port Forwarding from the drop-down list. This feature is used to automatically redirect common network ser

43 URL Filtering Select URL Filtering from the drop-down list. This is a type of parental control feature used to restrict certain web

44 DMZ Select DMZ from the drop-down list. A demilitarized zone is used to provide Internet services without sacrificing unauthorized access t

45 Appendix A – Specifications Standards IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u Wi-Fi data speed IEEE 802.11b: 11/5.5/2/1Mbps IEEE 802.11g

46 Appendix B – FCC Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply

47 Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (

5 1 Introduction The Wireless SOHO Router operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps

6 Package Contents Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packi

7 socket on the wall, and the DC inlet into the DC connector. Connection / Activity LED This LED will light up once an Ethernet cable is connected t

8 Network Configuration To better understand how the wireless LAN products work together to create a wireless network, it might be helpf

9 2 Understanding the Hardware Hardware Installation 1. Place the unit in an appropriate location after conducting a site survey. 2. Plug one en