EnGenius ESR-1221 EXT Bedienungsanleitung PDF herunterladen (Seite 20)

LAN Settings – Static IP

 Click on the LAN Interface link on the navigation drop-down menu. This feature

allows you to configure the LAN interface using a static IP address or as a DHCP

server/client. This IP address is also used to access the web-based interface.

 IP Address: Enter an IP address for this device.

 Subnet Mask: Enter the subnet mask for this IP address.

 Default Gateway: Enter the IP address of the default gateway.

 DHCP: Since you have specified a static IP address, select Disabled from the drop-

down list.

 802.1d: You may enable this option if you would like to use the spanning tree feature

for bridging. (optional)

 Clone MAC Address: Specify a MAC address if you would like to use a different

MAC address on this device. (optional)

 Click on the Apply Changes to save the changes.

Note: If you change the IP address here, you may need to adjust your PC’s network

settings to access the network again.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 46 47

Keine Kommentare

EnGenius ESR-1221 EXT Bedienungsanleitung Seite 20