EnGenius ENH700EXT Bedienungsanleitung PDF herunterladen (Seite 30)

7.1.1 Wireless Network

Wireless Mode Select the wireless mode that the current band of operation

will use. The options are:

1) 802.11 b/g/n Mixed

2) 802.11 b

3) 802.11 b/g Mixed

4) 802.11 g

802.11 n

only

Channel HT Mode Select the channel bandwidth of the antennas. The larger the

channel used, the throughput will be much better. Using a

lower channel, will increase the distance and stability of the

signal.

Extension Channel If the Channel HT Mode was set to 40Hz, the Channel

Frequency can be set if Auto is not selected. The Upper

Channel is associated with frequency channels 1-7, while the

Lower Channel is associated with channels 5-11.

Channel / Frequency Select the specific channel / frequency the ENH700EXT will

operate in for the corresponding band. This option is only

available

Auto

is not selected.

AP Detection To help select a specific channel / frequency to use, the

ENH700EXT can scan all the wireless access points in the area

to help select the optimal settings.

Current Profiles The ENH700EXT can operate up to total 16 SSIDs

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 65 66

Keine Kommentare

EnGenius ENH700EXT Bedienungsanleitung Seite 30