EnGenius ENH900EXT Bedienungsanleitung Seite 1

User ManualBusiness SolutionsDual Band Long Range Wireless N900 Outdoor Access Point ENH900EXTversion 1.0

10Physical InterfaceDimensions and WeightsLength: 11.22”Width:8.58”Depth: 2.1”Weight: 4.17 lbs 1 2.4 GHz Antennas: Detachable 5 dBi 2.4 GHz Omni-di

11Chapter 2 Before You Begin

12Windows XP/Windows 7InordertousetheENH900EXT,youmustrstconguretheTCP/IPv4 connection of your Windows OS computer system. 1. Click the S

134. Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties.5. Select Use the following IP address and enter an IP address that i

14Apple Mac OS X1. Go to System Preferences (Which can be opened in the Applications folder or selecting it in the Apple Menu).2. Select Network in t

151. Connect one end of the Ethernet cable into the main LAN port (PoE) of the Access Point and the other end to theAPEthernetportonthePoEinjec

16Using the provided hardware, the ENH900EXT can beattached to a wall or a pole.To attach the ENH900EXT to a wall using wall mounting kit.1.

17To attach the ENH900EXT to a pole using the provided pole mounting kit:1. Placethelockandatwashersonthefourhexcapscrewsand drive the s

18Chapter 3 Conguring Your Access Point

19This section will show you how to congure the deviceusingtheweb-basedcongurationinterface.Default SettingsPlease use your Ethernet p

2IMPORTANTTo install this Access Point please refer to the Quick Installation Guide included in the product packaging.

20Chapter 4 Building a Wireless Network

21 The ENH900EXT has the ability to operate in various modes. This chapter describes the operating modes of the ENH900EXT.Access Point ModeInAccessP

22The ENH900EXT can be used as a centralized Outdoor Access Point with which other EnGenius Wireless N 2.4 or 5 GHz Outdoor Client Bridges can associa

23WDS AP ModeThe ENH900EXT also supports WDS AP mode. This operating mode allows wireless connections to the ENH900EXT using WDStechnology.Inthism

24WDS Bridge ModeIn WDS Bridge Mode, the ENH900EXT can wirelessly connect different LANs by conguring the MAC address andsecurityse

25WDS Station ModeStation mode expands the WDS by receiving a wireless signal/service and sharing it through the Ethernet port. ENH900EXTWDS APon both

26AP Mesh ModeUnder the AP Mesh mode, the ENH900EXT can be used as the central connection hub for station or clients thatsupportI

27Under the Mesh-only mode, the ENH900EXT can becongured with the same Mesh SSID and securitypassword in order to associate with othe

28Chapter 5 Status

29Save ChangesThis page lets you save and apply the settings shown under Unsaved changes list, or cancel the unsaved changes and revert to the previou

3Chapter 1 Product Overview... 4 Key Features/Introduction...

30Network settings such as the LAN IP Address, Subnet mask, and DNS Address.•  The Wireless LAN Information 2.4 GHz/5 GHz section shows wireless inf

31• The Wireless Mesh Information - 2.4 GHz section shows wireless information such as Operation Mode, Wireless Mode, Channel Bandwidth, Frequency/Ch

322.4 GHz/5 GHz Connection ListClick the connection link under the Overview menu displays the connection list of clients associated to the ENH900EXT’s

33The Mesh Link ListMonitor the 2.4GHz Mesh Link List under the status menu. The page will display the current status of the Mesh Links under the Mesh

34Chapter 6 Network

35IPv4/IPv6 SettingsThis page allows you to modify the device’s IP settings.IP Network Settings: Select whether the device IP address willuseastati

36Spanning Tree Protocol (STP) SettingsThis page allows you to modify the Spanning Tree settings. Enabling the Spanning Tree protocol will prevent net

37Chapter 7 2.4 GHz & 5 GHz Wireless

38Wireless SettingsDevice Name: Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not broadc

39This page displays the current status of the Wireless settings of the ENH900EXT.2.4 GHz/5 GHz Wireless NetworkOperation Mode: Select Operation Mode.

4Chapter 1 Product Overview

40use by scanning nearby areas for Access Points.Distance: Species the distance between Access Pointsand clients. Note that longer distances m

412.4 GHz/5 GHz SSID ProleCurrent Prole: You can congure up to sixteen (16)different SSIDs (eight (8) per band). If multiple client

42Wireless SecurityThe Wireless Security section lets you congure theENH900EXT’s security modes: WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA,

43Wireless MAC FilteringWireless MAC Filtering is used to allow or deny network access to wireless clients (computers, tablet PCs, NAS, smartphones, e

44Wireless AdvancedWireless Trafc ShapingTrafc shaping regulates the ow of packets leaving aninterfacetodeliverimprovedQualityofServ

45WPA Mixed-Enterprise: Access Point / WDS AP modeEncryption: Select the WPA encryption type you would like. Please ensure that your wireless clients

46WDS Link SettingsUsingtheWDS(WirelessDistributionSystem)featurewillallow a network administrator or installer to connect to Access Points wi

472.4GHz Mesh Link SettingsUserscanchoosethe2.4GHzbandforMeshoperation.Mesh SSID: To create a mesh network, please enter the Mesh SSID of the

48Guest Network SettingsAdding a guest network allows visitors to use the Internet without giving out your ofce or company wirelesssecurity k

49Chapter8 Management

5Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditi

50Management VLAN SettingsThis page allows you to assign a VLAN tag to packets sent over the network. A VLAN is a group of computers on a networkwhos

51Wi-Fi Multi Media (WMM)ThisfeatureprovideQoS(QualityofService)forprioritizingmultimedia trafc on the network. WMM prioritizationach

52SNMP SettingsThis page allows you to assign the Contact Details, Location, Community Name, and Trap Settings for a Simple Network Management Protoco

53CLI SettingsCLI: The Command Line Interface (CLI) allows you to type commands instead of choosing them from a menu or selecting an icon.SSH: Enable

54Username: Enter the username for the email account that will be used to send emails.Password: Enter the password for the email account that will be

55Time SettingThis page allows you to set the internal clock of the ENH900EXT.Manually Set Date and Time: Manually specify the date and time.Automatic

56Auto Reboot Settings You can specify how often you wish to reboot the ENH900EXT.Auto Reboot Setting: Enables or disables the Auto Reboot function.Fr

57Wi-Fi SchedulerThe Wi-Fi Scheduler can be created for use in enforcing rules. For example, if you wish to restrict web access to Mon-Fri from 3pm

58Ping Test Parameters This page allows you to analyze the connection quality of the ENH900EXT and trace the routing table to a target in the network.

59Speed Test Parameters / LED Control This page allows you to control LED on/off for Power, LAN interface, or 2.4 GHz/5 GHz WLAN interface.LED Control

6in a campus setting using the 5 GHz band as a backhaul to provide multiple 2.4 GHz wireless cells for computers or mobile devices in common outdoor a

60This page allows you to change the ENH900EXT username and password. By default, the username is: admin and the password is: admin. The password can

61Backup/RestoreThis page allows you to save the current device configurations. When you save your configurations, you also can reload the saved confi

62System LogThe ENH900EXT automatically logs (records) events of possible interest in its internal memory. To view the logged information, click the L

63LogoutClick Logout in Management menu to logout.ResetIn some circumstances, it may be required to force the device to reboot. Click on Reset to rebo

64 Appendix

65Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital dev

66Europe – EU Declaration of ConformityThis device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test m

67This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and

68Français [French] Par la présente [nom du fabricant] déclare que l’appareil [type d’appareil] est conforme aux exigences essentielles et aux autres

7Package ContentsThe ENH900EXT package contains the following items:* • ENH900EXTAccessPoint• 3detachable5dBi2.4GHzOmni-directionalAntenna•

8WDS DetailWDS APWDS BridgeWDS StationMesh DetailMesh APMesh Only ManagementAuto Channel SelectionMultipleSSID:16SSIDs,8SSIDsperRadioBSSIDSNMP

9SecurityWEPEncryption-64/128/152bitWPA/WPA2 Personal (WPA-PSK using TKIP or AES)WPA/WPA2 Enterprise (WPA-PSK using TKIP or AES)Hides SSID in beac