EnGenius ENH900EXT Bedienungsanleitung PDF herunterladen (Seite 46)

WDS Link Settings

UsingtheWDS(WirelessDistributionSystem)featurewill

allow a network administrator or installer to connect to

Access Points wirelessly. Doing so will extend the wired

infrastructure to locations where cabling is not possible or

inefcienttoimplement.

Note: Compatibility between different brands and

models of Access Points is not guaranteed. It is

recommended that the WDS network be created using

the same models for maximum compatibility.

Also note: All Access Points in the WDS network need

to use the same Channel and Security settings.

To create a WDS network, please enter the MAC addresses

of the Access Points that you want included in the WDS.

There can be a maximum of four Access Points.

Note: Only applicable in WDS AP and WDS Bridge modes.

2.4 GHz/5 GHz WDS Link Settings

Security: Select None or AES from the drop-down list.

AES Passphrase: Enter the Key Values you wish to use.

Other Access Points must use the same Key to establish a

WDS link.

MAC Address: Enter the Access Point’s MAC address to

where you want to extend the wireless area.

Mode: Select to disable or enable from the drop-down list.

Save: Click Save toconrmthechanges.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 67 68

Keine Kommentare

EnGenius ENH900EXT Bedienungsanleitung Seite 46