EnGenius ENH200EXT Bedienungsanleitung PDF herunterladen (Seite 20)

3.3 Configuring Microsoft Windows XP

Use the following procedure to configure a computer running Microsoft Windows XP with the

default Windows interface.

1. On the Windows taskbar, click Start, click Control Panel, and then click Network and

Internet Connections.

2. Click the Network Connections icon.

3. Click Local Area Connection for the Ethernet adapter connected to the ENH200. The

Local Area Connection Status dialog box appears.

4. In the Local Area Connection Status dialog box, click the Properties button. The Local

Area Connection Properties dialog box appears.

5. In the Local Area Connection Properties dialog box, verify that Internet Protocol

(TCP/IP) is checked. Then select Internet Protocol (TCP/IP) and click the Properties button.

The Internet Protocol (TCP/IP) Properties dialog box appears.

6. In the properties dialog box, click Use the following IP address: to configure your

computer for Static TCP/IP. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the

ENH200EXT, and the default gateway which is the ENH200EXT’s IP address, 192.168.1.1.

Note: the subnet mask must match that of the ENH200EXT and the IP address must be on

that subnet.

7. Click the OK button to save your changes and close the dialog box.

8. Click the OK button again to save your changes.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 85 86

Keine Kommentare

EnGenius ENH200EXT Bedienungsanleitung Seite 20